|
OEM 3 button Blue Remote with 4D Transponder chip.Lock,Unlock and Read Door button
Frequency:434mhz
Note:battery is self charging while the ignition system is live.The battery cannnot be replaced.
Ford Transit 17.04.2006-2014
|
Product Parameters： |
|
|
Car model： |
Ford |
|
Frequency： |
434mhz |
|
Chips： |
4D |
|
Weight： |
50g |
|
Button： |
3 Button:Lock,Unlock，trunk |
|
Part Number： |
FCCID:0307830C6801 |
|
Blade： |
|
|
Battery： |
CR 2032 |
Programming Method:
Immobiliser: Diagnostically.
Remote: Automatically with immobiliser.
1. Use Obdstar X300DP PLUS C can program.
2. Remote automatically when programmed chip
3 Turn ignition on , load programmer , select ford - Transit-2006-2013 , select add key , remove key from ignition and insert again turn on check immobilizer light go out , turn to fire up engine , remove key from ignition and press any button to check locking or unlocking . Success ....
4 The correct method of this remote control is to use OBD to learn to match the remote control. After the chip is the device. After reading the key, insert the remote control into the ignition switch and start learning the matching key according to the prompt. At the same time, if the chips are matched successfully together, do not match the chip alone. If the chip is matched alone, the remote control will not match successfully
这个遥控器正确的方法是用OBD学习匹配遥控器之后 芯片是设备读取密钥之后，把遥控器插入点火开关，按照提示开始学习匹配密钥，同时芯片一起匹配成功的，千万不要单独的匹配芯片 如果单独匹配芯片之后 遥控器肯定不能匹配成功的
5
4
Customer Reviews